Weed Eater WE18XP - Manual (Page 10)

10
TO CONVERT MOWER
Your lawn mower was shipped ready to be
used as a mulcher. To convert to bagging:
• Open rear door and remove mulcher
plug. Store mulcher plug in a safe
place.
• You can now install grass catcher.
• To convert to mulching operation, install
mulcher plug into rear discharge open-
ing of mower.
CAUTION: Do not run your lawn
mower without rear mulcher plug or
approved grass catcher in place. Never
at tempt to op er ate the lawn mow er with
the rear door re moved or propped open.
OPERATION
TO ATTACH GRASS CATCH ER
1. Lift the rear door of the lawn mower
and place the grass catcher frame side
hooks onto the door pivot pins.
2. The grass catcher is secured to the lawn
mower housing when the rear door is
lowered onto the grass catch er frame.
CAUTION: Do not run your lawn
mower with out mulcher plug or approved
grass catch er in place. Never at tempt to
op er ate the lawn mower with the rear door
re moved or propped open.
Pivot pins Rear door
Grass
catcher
handle
Catcher frame hook
TO EMPTY GRASS CATCH ER
1. Lift up on grass catcher using the
frame han dle.
2. Remove grass catcher with clip pings
from under lawn mower han dle.
3. Empty clippings from bag.
NOTE: Do not drag the bag when
emptying. It will cause unnecessary wear.
CAUTION: Under nor mal usage, the
catch er material is subject to de te ri o ra tion
and wear and should, therefore, be
checked frequently for replacement. Any
replacement catcher should be checked
to ensure compliance with original
man u fac tur er's spec i fi
ca tions.
Bag
handle
Grass
catcher
frame
handle
Mulcher plug