View mode, View mode (vga), View mode view mode (vga) – Westinghouse LD-3255VX User Manual
Page 36: English, Standard, Fill, Overscan, 1 mode, Aspect ratio
SETUP MENUS
32
English
VIEW MODE
Use the View Mode sub-menu to select the aspect ratio of the display.
Press
on the remote control or MENU on the control panel to display the setup
menu screen then select View Mode to display the View Mode sub-menu. The
following options are available: Standard, Fill, Overscan, and 1:1 Mode.
Standard
Picture is displayed in its original size.
Fill
Picture is displayed to cover the entire screen.
Overscan
Picture is scaled down to fit the display area.
1:1 Mode
Matches the incoming resolution exactly to the pixels without any scaling.
Adjusting View Mode
1 Press the
/
keys on the remote control to select the desired option.
2 Press
or
to save and exit the screen.
VIEW MODE (VGA)
Select VGA as your input source and use the View Mode sub-menu to adjust the
display in VGA mode.
Press
on the remote control or MENU on the control panel to display the setup
menu screen then select View Mode to display the View Mode sub-menu. The
following options are available: Aspect Ratio, H. Position, V. Position, Fine Tune, and
Auto Sync.
Aspect Ratio
Use this sub-menu to select the display's aspect ratio in the following options:
View Mode
1:1 Mode
Fill
Overscan
Standard