Westinghouse TVHD 1080P TX-47F430S - Manual (Page 21)

English
20
Determining Available Channels
• When connected to an antenna, cable or other RF (radio frequency) source,
you’ll need to run “Autoscan”—available in the “TV” menu of the OSD (see
page 26 for more information)—in order for all available channels to be
received
—Use the up/down arrow keys to scroll below “Tuner” to “Auto Scan”
—Press “Enter” to start scanning for channels (identification of all
analog and digital channels may take several minutes)
NOTE: Depending on your area, some channels shown
may not be available for viewing
.
Set Your Time Zone
•
Scroll right to the “Settings” menu
—Use the up/down buttons to select “Time Zone”
—Select your local time zone, which allows you to receive HDTV
programming information
—Exit the OSD