Westinghouse WST1500-1509 - Manual (Page 17)

16
TIP NO. 1 - MOVING THE HEIGHT ADJUSTMENT
You may find it difficult to adjust the carpet height button when the machine is resting on the floor.
A simple method is to raise the head off the floor as shown below and slide the button to your preferred
carpet height position.
TIP NO. 2 – BUMPER GUARD
If the bumper guard is pulled away from the base during use it may result in a loss of suction
performance. To place the bumper back in position, remove the base cover (hood) and lock the bumper
on the base in the slots provided. Then replace the base cover (hood) to resume cleaning. (see page 15
of the owner’s manual for base cover removal and replacement steps)
WST1500-1509_IB_12-6-03 6/12/03 9:17 PM Page 17