Maintenance, Equipment compatibility – Wybron InfoTrace DPS850 User Manual
Page 13
13
Maintenance
SOFTWARE UPDATES
DPS850 firmware can be updated as new firmware versions become available
through the DMX/RDM port using an InfoGate gateway and the InfoGate
application. DPS850 firmware updates can be found at
www.wybron.com
Specific instructions for upgrading firmware in DPS850 and other Wybron
equipment can be found in the InfoGate User Manual, Firmware Upgrades
section.
Equipment Compatibility
DIMMED OUTPUT
The DPS850 can operate with any incandescent lamp rated 100 – 240VAC,
800W or lower.
ACCESSORY OUTPUT
The DPS850 is compatible with Forerunner, Nexera LX, and Wybron IT
equipment.
DO NOT USE COLORAM II EQUIPMENT WITH THE DPS850
Pinout of the accessory output is as follows:
Pin 1:
Common
Pin 2:
Data -
Pin 3:
Data +
Pin 4:
+24 VDC (50W max)