beautypg.com

Gas instructions, Gas instructions operating instructions – weber GENESIS E/S-310/320 User Manual

Page 13

background image

13

WWW.WEBER.COM

®

13

GAS INSTRUCTIONS

LIGHTING

Summary lighting instructions are inside the left hand cabinet door.

ƽ DANGER

Failure to open the lid while igniting the barbecue’s burners,
or not waiting 5 minutes to allow the gas to clear if the
barbecue does not light, may result in an explosive fl ame-up,
which can cause serious bodily injury or death.

Crossover

®

Ignition System

Note - The Crossover

®

ignition system ignites BURNER 1 with a spark from the igniter

electrode inside the Gas Catcher

ignition chamber. You generate the energy for the

spark by pushing the electronic ignition button. You will hear it sparking.

ƽ WARNING: Check hose each time before using barbecue

for nicks, cracking, abrasions or cuts. If the hose is found to
be damaged in any way, do not use the barbecue. Replace
using only Weber

®

authorised replacement hose. Contact

the Customer Service Representative in your area using the
contact information on our web site. Log onto
www.weber.com

®

.

A

B

C

b)

1.

a)

(1)

GAS INSTRUCTIONS

OPERATING INSTRUCTIONS

REFILLING THE LIQUID PROPANE CYLINDER

We recommend that you refi ll the LP cylinder before it is completely empty.
To refi ll, take LP cylinder to a “Gas Propane” dealer.
Removal of the gas supply cylinder
1) Shut off gas supply.
2) Disconnect hose with regulator from the cylinder.

A)

Unscrew regulator fi tting from tank turning clockwise.

B)

Move regulator lever (b) to down/off position . Push in regulator lever (b)
until it releases from tank.

C)

Move regulator lever to off position. Slide collar of regulator up (1) to
disconnect from tank.

3) Exchange empty cylinder for a full cylinder.

MOUNTING THE CYLINDER

Hold the hanger and tilt the cylinder so the two bent supports of the hanger are located
underneath the cylinder base fl ange. Adjust the length of the belt to the cylinder and
snap ends together.
Lift and place the cylinder hanger on the cylinder bracket as shown. (1)

RECONNECTING THE LIQUID PROPANE CYLINDER

See “CONNECTING THE LIQUID PROPANE CYLINDER”.