Westinghouse SK-40H590D User Manual

Page 17

3. Connect power cables

Connect the power cord to the LCD TV then to a proper AC outlet.

IMPORTANT: The power input voltage for TV is 120Vac, before beginning; make sure

all devices are turned off.

4. Turn Power On

Press the power button on the right side of the LCD TV, or press the power (Red) button

on the remote control.

5. Select input source for the LCD TV using the OSD menu or remote

control direct select buttons

6. If connecting to Antenna, Cable or other RF source on TV inputs:

See page 19 to scan and edit available channels.

7. If connecting to a PC(VGA):

For the best picture quality, set the timing of your computer to 1366 x 768 at 60Hz.

Refer to the graphic card’s user guide of your computer to set this timing.