Wegener Communications UNITY 550 - Manual (Page 6)

Q UICK S TART G UIDE
6 800072-02B www.wegener.com
OSD Menus
All menus are white text with a solid black background. Highlighted items display as black text on a
white background.
Figure 3 is a representation of the OSD Main Menu.
Figure 3: OSD Main Menu
Navigating OSD Menus
Use the arrow and Enter buttons on the Unity 550 ’s front panel to navigate and edit the fields on the
OSD menus. Selectable fields allow you to change the whole parameter from pre-determined options.
Editable fields allow you to change each digit of the parameter.
NOTE: Once a field is updated, you must select Activate and Exit on the submenu and then press
Enter to update the value of the field. Before pressing Enter , you may go back to any field and
correct it prior to acceptance.
Table 4: Unity 550 Types of OSD Action Fields
MAIN MENU
Carrier Status
Carrier Select
Software Version/ Serial No.
Signal Strength
Serial Port Select
Audio 1 Settings
Audio 2 Settings
Data PID Settings
Exit
Signal Strength Highlighted text
Button
Actions
Main Menu Submenu Edit Mode
Enter selects submenu goes to editable field no action
right arrow no action goes to editable field moves cursor to right
left arrow no action no action moves cursor to left
up arrow goes to previous
submenu goes to previous submenu
item increases value of
highlighted item
down arrow goes to next submenu goes to next submenu item decreases value of
highlighted item