Weslo 1750 - Manual (Page 6)

6
1. With the help of a second person, carefully raise the
Uprights (70) until the Wheels (30) are resting flat on the
floor.
3. Remove the six Screws (43) from the underside of the
Console (78).
Locate the two tabs on the Reading Rack (12). Slide the
tabs up into the two slots in the front of the Console (78).
Attach the Reading Rack to the Console with the six
Screws (43).
Assembly
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Assembly
requires a phillips screwdriver and an adjustable wrench (not included).
1
3
70
30
12
Tabs
78
43
43
2. Slide the upper end of a Handrail (101) onto the post on
the left Upright (70). Note: It will be necessary to pivot
the Handrail to the side and back repeatedly (see
arrow A) while pushing on the Handrail to slide it fully
onto the post. Next, pivot the lower end of the Handrail
down and pull back on it (see arrow B) to align it with the
hole in the left Upright.
Tighten two Handrail Screws (103) into the upper end of
the Handrail (101) and the left Upright (70). Tighten a
Handrail Bolt (95) with a Handrail Washer (102) into the
left Upright and the lower end of the Handrail.
Attach the other Handrail (101) to the right Upright (70) as
described above.
2
70
Hole
A
B
70
101
Post
103
103
101
102
102
95
95