Wells HW-10 - Manual (Page 10)

TROUBLE SHOOTING SUGGESTIONS
8
SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY
No power to warmer Circuit breaker off or tripped Reset circuit breaker
Unit not plugged in Make sure unit is plugged in to
power receptacle
Warmer will not heat Temperature control not set Set control to desired
temperature
Internal damage Contact you Authorized Wells
Service Agency for repairs
Warmer trips circuit breaker Pan leaking or other internal
damage Contact your Authorized Wells
Service Agency for repairs
Warmer slow to heat Mineral deposits on pan acting as
a insulator Clean pan(s) with Wells Delime
Cleaner
Connected to wrong voltage Verify supply voltage - must
match voltage on warmer
nameplate
There are no user-serviceable
components in the appliance
shroud. In all instances of damage
or malfunction, contact your
Authorized Wells Service Agency
for repairs.