Wharfedale LX Series - Manual (Page 4)

Page 6-7:
Page 4-5:
Page 2 & Page 3 Cover & Back
LX and LX-E SERIES PROVIDE EXCELLENT SOUND
PROJECTION, VOCAL PERFORMANCE AND BALANCED
MUSICAL REPRODUCTION
In the LX Series, the powerful LX-15B, LX-18B, LX-18MB and LX-218B sub bass
systems have been designed for use with large-scale LX-12, LX-15 and LX-215
systems to extend LF output power.
In demanding professional applications, the LX-15B and LX-18B, which feature an
internal two-way network, allow a four box system to be powered by one
amplifier. Tough industrial carpet covering provides durability and protection, and
contributes to the overall safety in the set-up and use of the LX systems.
The LX-E Series has the same model line up as the LX Series. The LX-E is finished in
a hardwearing, two-stage epoxy black paint finish and is constructed from premium
grade plywood for extra strength. Among the whole series, the LX-12E and LX-15E
have multiple mounting points for maximum flexibility when installing.
In comparison to the LX Series, the LX-E also has the same power ratings.
FEATURES
• High Performance, arrayable trapezoidal cabinets
• 50 mm Titanium diaphragm true compression driver for brilliant, natural HF
reproduction
• Large Elliptical Wave Guide Horn provides superior control over HF
coverage with reduced distortion, greater output and smoother frequency
response
• Cast frame, large voice coil woofers for sustained output capability and
minimal power compression under extended high power use.
• Heavily braced enclosure
• Dynamic, full range frequency response
• ProTech™ driver protection system
• Recessed metal jack plates with series Speakon™ type and 1/4" inputs
• Cast aluminum, 35mm pole adaptor for stand mounting
The information in this manual is subject to change without notice.
All rights to the mentioned trademarks reside with their respective companies.
All rights reserved © 2004 Wharfedale Pro
Wharfedale Pro is a member of International Audio Group
www.wharfedalepro.com
Created from the ground up into the
demanding, high performance world of
professional audio, Wharfedale
Professional enjoys global success with
a range of great value, great sounding,
and innovative products. The
Wharfedale Professional philosophy is
simple: Value, Integrity and Performance
– VIP.
Since 1932, Wharfedale has been at the
forefront of loudspeaker technology –
these seventy years of experience in
the design and manufacture of audio
systems make Wharfedale Pro products
second to none.
We put in a lifetime of experience –
you get out a lifetime of performance.
EXTENSIVE LX & LX-E SERIES COVER THE HIGH-
PERFORMANCE SPECTRUM
The new LX and LX-E Series of loudspeakers each consist of nine models in total,
comprising five full ranges (with FOH and monitor systems in both 12 inch and 15
inch versions), and four sub bass cabinets (in both 15 inch and 18 inch versions).
Boasting distinctive style and features, these high powered, high performance
arrayable trapezoidal enclosures are capable of extremely high sound pressure
levels and exceptional sonic quality with wide dynamic range and bandwidth.
Both series have been developed with exceptional features including the large
elliptical Wave Guide horn, the use of cast-fame, large voice coil woofers for
sustained output capability and minimal power compression under extended
high-power use, and the ProTech™ protection system designed to protect the
HF unit, just to name a few.
In creating the LX Series, we set some basic parameters to design a range that
delivers without exception the performance, features and quality that our
customers demand. We also kept it simple; the LX-E range has a ‘systems’
approach, a range of models that can be used together to provide solutions for
nearly every audio challenge.
NEW LOOK, DISTINCTIVE FEATURES, HIGH STANDARD,
GREAT POWER AND MORE CHOICES.
Elliptical Wave Guide Horn (1.4” Exit)
In comparison to a conventional rectangular horn, the elliptical
Wave Guide offers superior control over HF coverage,
with reduced distortion, greater output and smoother
frequency response. The elliptical shape means that
there are no corners or parallel surfaces to distort,
diffract or reflect the sound – therefore the output is
smoother, cleaner and more consistent. Again, due to
the elliptical shape, mid to high frequencies are
diffused more efficiently.
Titanium 50mm Diaphragm, 1.4” Exit Compression Driver
The elliptical Wave Guide horn is coupled with a
50mm (2”) tr ue compression driver designed
specially for the LX and LX-E Series. This titanium
diaphragm driver features a 1200g-magnet with a
3 5 m m ( 1 . 4 ” ) e x i t f o r b r i l l i a n t , n a t u r a l H F
reproduction.
Large
elliptical wave guide horn
provides superior control
over HF coverage
Large magnet structure
and tight construction
tolerances give accuracy,
high efficiency and
reliability
With enclosures built from a
combination of particle and MDF
in a black carpet finish, the LX is
ideal for use in live sound
applications.
With enclosures built from
plywood in a black paint finish, the
LX-E has extra features to make it
more suitable for the installation
market.
The LX and LX-E Series of
loudspeakers each consist of nine
models in total, comprising five full
ranges multipurpose systems (with
FOH and monitor systems in both 12
inch and 15 inch versions), and four sub
bass cabinets (in both 15 inch and 18
inch versions). MULTIPURPOSE LOUDSPEAKER SYSTEM MULTIPURPOSE LOUDSPEAKER SYSTEM
SUBWOOFER RANGE
LX-12, LX-12E
Two-way. 12" high power woofer, elliptical wave guide horn with 2" (50mm) titanium diaphragm driver,
Trapezoidal enclosure, 12 X M10 rigging points for mounting (LX-12E only),
Continuous 400W/Music 800W power handling.
LX-12M, LX-12ME
Two-way monitor. 12" high power woofer, elliptical wave guide horn with 2" (50mm) titanium
diaphragm driver,
Continuous 350W/Music 700W power handling.
LX-15, LX-15E
Two-way, 15" high power woofer, elliptical wave guide horn with 2" (50mm) titanium diaphragm driver,
Trapezoidal enclosure, 12 X M10 rigging points for mounting (LX-15E only),
Continuous 400W/Music 800W power handling.
LX-15M, LX-15ME
Two-way monitor, 15" high power woofer, elliptical wave guide horn
with 2" (50mm) titanium diaphragm driver,
Continuous 350W/Music 700W power handling.
LX-215, LX-215E
Quasi 3-way, 15" high power woofer, elliptical wave guide horn with 2" (50mm)
titanium diaphragm driver, Trapezoidal enclosure, Two castors built in,
Continuous 700W/Music 1400W power handling.
LX-15B, LX-15BE
Super subwoofer, 15" driver, Two Speakon™ type connector, Crossover
with high pass output for mid/high (LX-15B only), Trapezoidal enclosure,
Pole mount adaptor,
Continuous 700W/Music 1400W power handling.
LX-18B, LX-18BE
Super subwoofer, 18" driver, Two Speakon™ type connector, Crossover with high pass output for
mid/high (LX-18B only), Trapezoidal enclosure, Pole mount adaptor,
Continuous 800W/Music 1600W power handling.
LX-218B, LX-218BE
Super subwoofer, 2 x18" (460mm) drivers with 4" (100mm) high temperature voice coils for
larger system set-ups, Two Speakon™ type connector, Rectangular enclosure, The birch ply
cabinet is fitted with substantial handles and 4x4" (100mm) castors (LX-218BE only),
Continuous 1600W/Music 3200W power handling.
LX-18MB, LX-18MBE
18" (460mm) modular two way modular cluster element super subwoofer, Two Speakon™ type
connector, Compact frontal dimensions, Co-axial ports, Pole mount adaptor, Use in blocks of
four to provide astounding sub bass output levels
Continuous 800W/Music 1600W power handling
ProTech™ Driver Overload Protection System
Understanding that sound systems are often asked to perform beyond their original design
parameters, we have designed a smooth, progressive dynamic limiter/protection system that
is carefully tailored to each model. Overloads are limited and drivers are protected against
long term transient or peak conditions. The ProTech™ system progressively converts excess
power to heat and triggers a reduction in power to the HF driver. When the overload
condition is removed the system returns seamlessly to normal operation.
Sophisticated Crossovers Design
Each crossover in the LX and LX-E Series is built using the highest quality components
and designed specifically for that system, enabling smooth power and frequency
response control through the crossover region. The LX-15B and LX-18B feature integral
two-way networks that allow a four-box system to be powered by one amplifier.
Trapezoidal, Plywood and Composite Construction
The LX-E’s cabinet is constructed from plywood on all critical surfaces (where durability
is important) and wood composite where resonances need to be kept to a minimum.
The trapezoidal shape further improves sonic accuracy by significantly reducing internal
flutter echoes and standing wave resonances that are often apparent in rectangular
shape cabinets.
Mounting points:
For maximum flexibility when installing, we have designed two specific models which
feature 12 x M10 rigging points allowing the cabinets to be flown or arrayed. The
LX-12E and LX-15E are fitted with these flying inserts.
Protective Finish
The LX is all finished using a tough, black industrial carpet offering exceptional
protection and durability for life on the road. The LX-E is coated with Duraguard™, an
abrasion resistant paint that creates a protective ‘skin’ around the cabinet. Both finishes
contribute to the overall safety in the set up and use.
Strong Grille, Square Handles and Castors
In order to provide maximum protection to the internal components of the
loudspeakers, the front grilles are full steel and 1.5mm thick. The square handles allow
the cabinets to be gripped securely and comfortably, therefore making them easy to
move. Built-in castors are available on some larger units for ease of transportation.
Value, Integrity and Performance
BOTTOM VIEW LEFT SIDE VIEW FRONT VIEW RIGHT SIDE VIEW BOTTOM VIEW TOP VIEW
449.77
61
8.
00
61
8.
00
102.85 102.85
426.00
53
9.7
0
318
.17
449.77
TOP VIEW FRONT VIEW LEFT SIDE VIEW RIGHT SIDE VIEW BOTTOM VIEW
493.00 493.00
592
.08
59
2.0
8
68
5.
50
68
5.
50
68
5.
50
500.00
113.41 113.41
BOTTOM VIEW FRONT VIEW
TOP VIEW
SIDE VIEW REAR VIEW
355.87
46
1.
35
506.00
11
38
.0
0
TOP VIEW SIDE VIEW FRONT VIEW SIDE VIEW BOTTOM VIEW
65
0.
00
545.00
54
5.
00
REAR VIEW TOP VIEW SIDE VIEW FRONT VIEW SIDE VIEW BOTTOM VIEW
650.00 1041.00 650.00
54
1.
00
54
1.
00
TOP VIEW FRONT VIEW BOTTOM VIEW SIDE VIEW REAR VIEW
(LX-15BE)
275.16
55
9.
00
55
9.
00
61
5.
00
470.00
REAR VIEW
(LX-15B)
FRONT VIEW TOP VIEW BOTTOM VIEW SIDE VIEW REAR VIEW
(LX-18BE)
336.00
570.00
65
2.
00
71
5.
00
REAR VIEW
(LX-18B)
W
P. LX
.0
1.
20
05
Heavy duty
protective
steel grille
Built-in castors
for larger
enclosures
Secure square handles
Wharfedale International Limited
IAG House, Sovereign Court, Ermine Business Park,
Hungtingdon Cambs, PE29 6XU, England
IAG America Inc.
15 Walpole Park South, Walpole MA02081, USA
APPLICATIONS 2-way 2-way monitor 2-way 2-way monitor Quasi 3-way subwoofer subwoofer subwoofer subwoofer
50-20kHz 60-20kHz 40-20kHz 55-20kHz 40-20kHz 42-170Hz 38-150Hz 38-1.5kHz 30-1.5kHz
(LX-15B) (LX-18B)
42-2kHz 38-1.5kHz
(LX-15BE) (LX-18BE)
SENSITIVITY 1w@1m (dB) 97 97 98 98 101 98 99 99 100
COVERAGE Horiz. 90 90 90 90
COVERAGE vert. 45˚ 45˚ 45˚ 45˚
POWER HANDLING (watts)
continuous 400 350 400 350 700 700 800 800 1600
music 800 700 800 700 1400 1400 1600 1600 3200
peak 1600 1400 1600 1400 2800 2800 3200 3200 6400
MAX SPL (dB) 129 128 130 129 135 132 134 134 138
SYSTEM IMPEDANCE 4 or 8 8 4 or 8 8 4 4 or 8 4 or 8 4 or 8 4
LF DRIVER
driver size 12" 12" 15" 15" 15" 15" 18" 18" 18"
H F SECTION
impedance (W) 8 8 8 8 8
coil size (mm/ins) 50 / 2" 50 / 2" 50 / 2" 50 / 2" 50 / 2"
exit size (mm/ins) 35 / 1.4" 35 / 1.4" 35 / 1.4" 35 / 1.4" 35 / 1.4"
diaphragm matl Titanium Titanium Titanium Titanium Titanium
protect type bulb bulb bulb bulb bulb
HF HORN
type Elliptical Elliptical Elliptical Elliptical Elliptical
CROSSOVER SECTION
crossover Frequency 1.8k 1.8k 1.8k 1.8k 1.8k 170Hz (LX-15B only) 150Hz (LX-18B only)
system Fb 50Hz 60Hz 40Hz 55Hz 40Hz 42Hz 38Hz 38Hz 30Hz
hi pass out 120Hz (LX-15B only) 120Hz (LX-18B only)
ENCLOSURE TYPE
finish colour (LX) carpet black carpet black carpet black carpet black carpet black carpet black carpet black carpet black carpet black
finish colour (LX-E) paint black paint black paint black paint black paint black paint black paint black paint black paint black
construction materials (LX) MDF/particle MDF/particle MDF/particle MDF/particle MDF/particle MDF/particle MDF/particle MDF/particle MDF/particle
construction materials (LX-E) 15mm plywood 15mm plywood 15mm plywood 15mm plywood 18mm plywood 18mm plywood 18mm plywood 18mm plywood 18mm plywood
RIGGING HARDWARE
12 x M10 flying inserts no 12 x M10 flying inserts no no no no no no
(LX-12E only) (LX-15E only)
STAND ADAPTOR yes no yes no no yes yes yes yes
HANDLE
type square square square square square square square square square
quantity 2 2 2 2 3 2 4 2 4
GRILLE
thikness (mm) 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
type full steel full steel full steel full steel full steel full steel full steel full steel full steel
INPUT CONNECTOR
speakon™ NL4 type 2 2 2 2 2 2 2 2 2
paralle with input connector yes yes yes yes yes yes yes yes yes
hi pass out connector: no no no no no LX-15B only LX-18B only no no
CASTOR no no no no 2 no no no 4 (LX-218E only)
PRODUCT DIMS. (mm)
H 630 618 700 685.5 1138 615 715 545 541
W (front / rear) 396 / 269 426 / 426 470 / 319 500 / 500 506 / 356 470 / 275 570 / 336 545 / 545 1041 / 1041
D 396 450 450 493 461 559 652 650 650
WEIGHT (KG)
net (LX / LX-E) 26.5 / 27.8 21.5 / 22.5 33.5 / 34.6 28.4 / 29.5 59.0 / 60.6 33.5 / 35.6 45.5 / 47.9 39.0 / 40.4 67.5 / 70.8
gross (LX / LX-E) 28.1 / 30.4 23.1 / 25.1 35.7 / 38.3 30.6 / 32.9 63.2 / 66.8 36.3 / 40.1 48.7 / 52.9 42.2 / 44.6 74.4 / 78.9
LX & LX-E Series Technical Specifications
FREQUENCY RESPONSE
@ +/- 3 dB
LX-12 / LX-12M / LX15 / LX15M / LX-215 / LX-15B / LX-18B / LX-18MB / LX218B /
LX-12E LX-12ME LX15E LX15ME LX215E LX15BE LX-18BE LX18MBE LX218BE
MODEL
Secure
rigging points
(LX-12E & LX-15E only)
BOTTOM VIEW FRONT VIEW SIDE VIEW REAR VIEW TOP VIEW
268.60
39
6.
00
63
0.
00
396.00
396.00
* No rigging for LX-12
TOP VIEW FRONT VIEW SIDE VIEW REAR VIEW BOTTOM VIEW
319.37
45
0.
00
470.00
70
0.
00
* No rigging for LX-15 *No castors for LX-218B
Trapezoidal designs allow
more compact arrays and
sonic accuracy
Enclosures of the LX-E
constructed from premium
grade plywood for durability
Highly protective
Duraguard ™
coating
(LX-E Series only)
Durable black
carpet covering
(LX Series only)