Cooking with more than one cook cycle – Whirlpool CMT102SG User Manual

Page 15

4. Start the oven.

At end of cooking time:

Five tones will sound, and the display will
show “End”.

Two tones will sound every minute until
you open the door or touch OFF/CANCEL
to return the display to the time of day.

To see the cook power during
cooking:

The power level will be displayed “P-5”.
(Example for 50% cook power.)

NOTE: If you wish to change the cook
power press the desired Number pad.

Cooking with more
than one cook cycle

For best results, some recipes call for one
cook power for a certain length of time, and
another cook power for another length of
time. Your oven can be set to change from
one to another automatically, for up to 4
cycles.

NOTE: Refer to a reliable cookbook for
cooking times and power levels.

1. Put the food in the oven and

close the door.

(cooking time
counts down)

TOUCH

1. Put the food in the oven and

close the door.

2. Set the cooking time.

Example for 7 minutes, 30 seconds:

3. Set the cook power.

Example for 50% cook power:

NOTES:

•

You cannot enter a cook power higher
than 10. If you touch a number from 2
to 9 after you touch Number pad 1, the
cook power will become the second
number you touched. For example, if
you touch Number pads 1 and 4 the
cook power would be “4.”

COOKING WITH MICROWAVES ONLY

TOUCH

4393788v06(c98).qx 5/6/98 1:58 PM Page 15