Walker IMPLEMENT HITCH SB6670 - Manual (Page 52)

Maintenance Instructions
LUBRICATION
52
Ident Lubrication No.
No. Location Type Places
Ident Lubrication No.
No. Location Type Places
Two-Stage Snowblower
1 Auger Sections Grease 2
2 Gearbox Oil * 1
3 Cutting Edge Oil 1
4 Skid Shoes Grease 2
5 Gearbox Shaft Oil 1
6 Rotation Worm Grease 1
7 Reduction Chain Oil 1
8 Sprockets Oil 2
9 Parallel Bar Pivot Pins Oil 2
10 Universal Joint Shaft Assembly Grease ** 1
(Grease Slide Area)
11 Rotation Handle Pivot Oil 1
12 Plastic Anti-Friction Insert Grease 1
13 Chute Knobs Grease 2
14 Deflector Slide Area Grease 1
* Gearboxes are permanently lubricated and
sealed requiring no scheduled lubrication.
Oil level should be checked only when an oil
leak is noted. Refer to Two-Stage Snow-
blower Gearbox in this section.
** Grease every eight (8) hours.
NOTE: Tractor Lubrication Points are not shown here.
For Tractor Lubrication Points, refer to the ap-
propriate Tractor
OWNER’S MANUAL or IL-
LUSTRATED PARTS MANUAL.