Weider WESY2966.0 - Manual (Page 7)

7
2. Attach the Base Cover (4) to the Base (2) with
two M4 x 50mm Screws (66).
Do not over-
tighten the Screws (66). If you overtighten
the Screws, you will damage the Base
Cover.
See the inset drawing. Attach a Cable Clip
Hook (86) to the Upright Base (5) with two M5 x
16mm Screws (78). Attach the other Cable Clip
Hook in the same manner.
3. Attach the Upright (6) to the Upright Base (5)
with two M10 x 25mm Button Screws (64) and
two M10 Split Washers (88).
Do not tighten
the Button Screws yet.
Attach the Rear Frame (10) to the Upright Base
(5) with two M10 x 32mm Button Screws (68),
two M10 Split Washers (88), two M10 x 70mm
Bolts (69), two M10 Washers (59), and two M10
Nylon Locknuts (56). Tighten the M10 x 25mm
Button Screws (64).
See the inset drawing. Attach the Crossbar (7)
to the Upright (6) with the Crossbar Cap (85),
two M10 x 65mm Button Screws (79), and two
M10 Washers (59).
4
2
2
66
66
6
10
56
64
59
88
3
68
88
88
68
69 5
86
86
78
5
7
85
79
59
6