Philips SRU530 - Manual (Page 4)

Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Adjusting device selection (Mode keys) . . . . . . . . . . . . . . . . . . . . . . . 8-9
Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . 9
Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . . 9
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 62-75
1. Introduction
Congratulations on your purchase of the Philips SRU530 universal remote
control. After installing the remote control you can operate a maximum of
3 different devices with it:TV, DVD plyer/recorder and VCR.
You can find information about how to prepare this remote control for use in
the chapter ‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1
Press the cover inwards and slide it in the
direction of the arrow.
2 Place two AAA type batteries into the battery
compartment, as shown.
3 Slide the cover back and click it firmly into
place.
Note: If the mode keys (TV, DVD and VCR) blink four times after every key press, the
remote control is indicating that its batteries are running low. Replace the old
batteries with two new AAA batteries.
Testing the remote control
The remote control has been programmed to operate most Philips devices.
Because the SRU530 may use different signals for each brand and even for
different models of the same brand, it is advisable to test whether your
device responds to the SRU530.The example below (TV) instructs you how
to do this.You can repeat the same steps for other devices (DVD player/
recorder and VCR) which you want to operate using the SRU530.
Example of TV:
1 Turn your TV on manually or use the original remote control.
Tune to channel 1.
2 Press the TV key to select TV.
Press the key until it lights up.
– If the key does not light up, check whether the
batteries are properly inserted
(see ‘Inserting the batteries’).
4
Instructions for use
English
SRU530_87_v6.qxd 26-04-2005 14:25 Pagina 4