weber SUMMIT 650 - Manual (Page 9)

9
INSTALL CONDIMENT
HOLDERS AND WORK
SURFACES
Figure 11
You will need: two condiment holders, two stainless steel
work surfaces, and four wing nuts.
Place the condiment holders on the left and right side of
the frame. Figure 11(a). Set the work surfaces over the
condiment holders on both sides of the barbecue. The
studs of the work surface go through the holes in the
top of the condiment holder and through the frame rail.
Thread on the wing nuts on the front and back and
tighten. Figure 11(b).
a)
b)
Studs
underneath
work surfaces
IMPORTANT LP
CYLINDER INFORMATION
Failure to follow these DANGER statements
exactly may result in a fire causing death or
serious injury.
ƽDANGER
ƽNEVER store a spare LP Cylinder under or near this
barbecue.
ƽNEVER fill the tank beyond 80% full.
Your Weber gas grill is equipped with a cylinder
supply system designed for vapor withdrawal.
ƽWARNING: Only use this grill outdoors in a well-
ventilated area. Do not use in a garage, building,
breezeway or any other enclosed area.