Weslo WCTL39110 - Manual (Page 10)

HOW TO SELECT KILOMETRES AND MILES
The console can display distance and speed in either kilometres or miles. To
change the unit of measurement, first
UNPLUG THE POWER CORD. Next,
remove the screws attaching the console to the console base. Lift the console
a few inches, being careful not to pull on the wires, and turn the console over.
Locate the small switch on the back of the console. Move the switch upward
or downward to select kilometres or miles. Re-attach the console to the con-
sole base.
After changing the unit of measurement, remove one of the
batteries from the console for about five seconds and then reinsert it.
This will reset the console.
10
Console Screws
Switch
Screws