weber GENESIS 1000 - Manual (Page 22)

22
Step 23
Complete accessory installation
You will need: Warm-Up Basket, warming rack, work table,
accessory rack, three tubing plugs, thermometer and a
hammer.
Insert one end of the Weber Warm-Up Basket into the hole
in the right end of the lid and the other end into the slot in
the left end of the lid. Figure 30 (a).
Set the warming rack into the slots at the rear of the
cooking box. Figure 30 (b).
Set the work table onto the left side rails. Figure 30 (c).
Set the accessory rack in place between the two frame
connectors. Figure 30 (d).
Insert the thermometer into its holder. Figure 30 (e).
Insert the tubing plugs into the ends of the frame. To fully
seat the plugs, you may have to tap them lightly with a
hammer. Figure 30 (f).
Figure 30
(a)
(b)
(c)
(d)
(e)
(f)
ƽ
CAUTION: To keep the barbecue stationary, the tabs
on the locking casters should be in the down position.