Windsor SABER S34SP - Manual (Page 14)

14
SERVICE SCHEDULE
SABER/STRIDE II 28/34 98570 5/1/98
Maintenance Item Daily Weekly Monthly Annually
Check Battery water level *
Check Vac Hose Connections *
Clean the Squeegee Blades *
Inspect Brushes or Pads for debris ie: wire, string, wear *
Inspect Vac fan shut off float screen *
Drain & Rinse Tanks *
Raise Squeegee Assembly *
Raise Scrub Deck Assembly *
Charge the Batteries *
Remove the Pad Drivers/Brushes *
Check the Brushes/Padsfor Damage and or wear *
Clean Squeegee blades *
Clean recovery tank vac shutoff & screen *
Check Battery Cells w/Hydrometer *
Check Solution Strainer *
Check Pivot Points, Caster, and Squeegee for proper lubrication *
Inspect tank and hoses *
Clean tops of Batteries and Tray *
Check Battery Cable Clamps *
Use a Vacuum to remove lint from the motor windings *
Grease Squeegee pivot and Casters *
Inspect all Motors for Carbon Motor Brush Wear. *
Before
Starting
the Work
Period
End of Work
Period
Before
Storing