Caution – Wagner SprayTech CS9100 User Manual
Page 4
2
THIS UNIT IS PROVIDED WITH A THERMALLY PROTECTED AUTOMATIC RESET. IF AN OVERLOAD
OCCURS THE THERMALLY PROTECTED AUTOMATIC RESET DISCONNECTS THE MOTOR FROM THE
POWER SUPPLY.
•
Motor will restart without warning when protector automatically resets.
•
Always disconnect motor from power supply before working on equipment.
•
When thermally protected automatic reset disconnects the motor from the power supply, relieve pressure by
turning priming valve to “prime”
.
•
Turn ON-OFF switch to OFF.
CAUTION: THE CAUSE OF THE OVERLOAD SHOULD BE CORRECTED BEFORE RESTARTING.
CAUTION
CAUTION
Be sure to read, understand and observe all safety
precautions and warnings. See pages 3 thru 6.
Read product labels—follow manufacturer’s recommendations
All procedures and recommendations presented in this manual are based on information which SprayTECH believes
to be reliable. However, such procedures and recommendations are to be implemented and used by persons reading this
manual at their own discretion and risk.
Label directions, procedures and precautions set forth by the manufacturers of finishing products are to be considered
the best source of information on those products. No attempt has been made in this manual to provide complete data on
all the various materials which may be used in your airless sprayer.
Application procedures are presented here as suggestions only, and are not to be construed as representations or
warranties as to safety, performance, results or fitness for any intended use ot the various types of products mentioned.
© 1995 WAGNER SPRAY TECH CORPORATION. ALL RIGHTS RESERVED.
BEFORE YOU CALL
Have the following information available:
Model #____________
Serial #____________
Purchase Date________________________