Wharfedale MP 1200 - Manual (Page 6)

POWER AMPLIFIER
8W(1%THD) 260 W x 2 330W x 2
4W(1%THD) 400 W x 2 600 W x 2
2W(1%THD) 640 W x 2 900 W x 2
Bridged mono, mode
8W(1%THD) 800 W
1200 W
4W(1%THD) 1280 W 1800 W
INPUT SENSITIVITY & IMPEDANCE:
@ rated output power,4 ohms 0.775 V
0.775 V
Unbalanced, 1/4 hone jack 10Kohms 10Kohms
Balanced , XLR 20Kohm 20Kohm
VOLTAGE GAIN 35dB 35dB
SLEW RATE:8W full swing
Stereo > 30v/ sec
> 30v/ sec
Bridged mono, mode > 50v/ sec > 50v/ sec
CHANNEL SEPARATION: 76dB 76dB
SIGNAL TO NOISE(20Hz-20KHz) >100dB >100dB
DISTORTION: (SMPTE-IM)
less then 0.01% less then 0.01%
FREQUENCY RESPONSE:
(+/-1dB) @ rated output, 4 ohms
20Hz-20KHz 20Hz-20KHz
(+/-1dB) @ rated output, 4 ohms 5Hz-50KHz 5Hz-50KHz
DAMPING FACTOR: (8 ohms, 1 KHz) Greater then 300 Greater then 300
TOPOLOGY
AB AB
CONNECTORS:
,, ,,
Input XLR and1/4 TRS XLR and1/4 TRS
Output 5 way binding posts or Neutrik Speakon 5 way binding posts or Neutrik Speakon
CONTROLS
Front AC switch, CH.1 and CH.2 gain knobs AC switch, CH.1and CH.2 gain knobs
Real Stereo/Briding mode switch Stereo/Briding mode switch
INDICATORS
Power switch on/off mute, Short circuit, Open Power switch on/off mute, Shortcircuit ,Open
Circuit, Thermal circuit, Thermal
COOLING Continuously vasriable-speed fan Continuously vasriable-speed fan
WEIGHT
Gross Weight 23Kg 25Kg
Net Weight 21.5Kg 23.5Kg
DIMENSION(HxWxD) 480x360x150(mm) 480x360x150(mm)
Specifications
MP 1200 MP 1800
Specifications and design subject to shange without notice for improvements.
RATED OUTPUT POWER
Stereo mode , EIA: Bothe Channels Driven
MP 1200/1800 5