Wells RW-16 thru RW-36 - Manual (Page 3)

WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 6
CLEANING INSTRUCTIONS 8
TROUBLESHOOTING SUGGESTIONS 9
MAINTENANCE INSTRUCTIONS 10
PARTS & SERVICE 11
CUSTOMER SERVICE DATA 11
Thank You for purchasing this Wells Manufacturing Co. appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
INTRODUCTION
1
MODELS
VOLTS
50/60 Hz 1ø WATTS AMPS
POWER SUPPLY
WIRING REQUIRED
RW-16 RW-16HD 120 VAC 450 W 3.8 120 VAC (L1, Neut. Gnd)
RWN-16 208 VAC 338 W 1.6 208 VAC (L1, L2, Gnd)
240 VAC 450 W 1.9 240 VAC (L1, L2, Gnd)
RW-26 RW-26HD 120 VAC 900 W 7.5 120 VAC (L1, Neut. Gnd)
RWN-26 208 VAC 676 W 3.3 208 VAC (L1, L2, Gnd)
240 VAC 900 W 3.8 240 VAC (L1, L2, Gnd)
RW-36 RW-36HD 120 VAC 1,350 W 11.3 120 VAC (L1, Neut. Gnd)
RWN-36 208 VAC 1,014 W 4.9 208 VAC (L1, L2, Gnd)
240 VAC 1,350 W 5.6 240 VAC (L1, L2, Gnd)
RW-176HD 120 VAC 550 W 4.5 120 VAC (L1, Neut. Gnd)
208 VAC 413 W 2.0 208 VAC (L1, L2, Gnd)
240 VAC 550 W 2.3 240 VAC (L1, L2, Gnd)
SPECIFICATIONS
NOTE: Units with "T" in suffix (e.g. RWT-176HD) are built with the optional thermometer, and are
electrically identical to units without a "T".