Wolf Appliance Company Elbrus - Manual (Page 20)

20
6. Operating Your Woodstove
Etna, Elbrus und Vesuv
6.1 Regulating the Heat
Draft controls to regulate secondary air are located under the door on the
right and left sides respectively. Pull the control towards you to open.
.
1) Secondary Draft Control
MERU:
The secondary draft control lever regulates the amount of air that is needed to reburn exhaust gases that are produced in
the fireplace during the wood burning process. A portion of this secondary air circulates from the top to the door and helps
to keep the glass window clean.
The fire intensity can be regulated with the secondary draft control lever.
Creosote - Formation and Need for Removal - When wood is burned slowly, it produces tar and other organic vapors,
which combine with expelled moisture to form creosote. The creosote vapors condense in the relatively cool chimney flue
of a slow-burning fire. As a result, creosote residue accumulates on the flue lining. If ignited, this creosote creates an ex-
tremely hot fire. Burning wood, the chimney connector and chimney should be inspected at least once every two months
during the heating season to determine if a creosote buildup has occurred.
1
ash
drawer
Close Open
1
Pull = Open
Press = Close