Winegard MA1000W - Manual (Page 2)

2
Operation Instructions for Motorized Sensar
FIGURE 1
Controller
Panel
Control Panel Light and Button Functions:
(All three lights blink when obstruction occurs - See Trouble
Shooting)
Figure 1 shows control panel components. Operation is
simply a matter of pressing the button for the operation you
desire.
OPERATION
STEP 1: Press Power Button, light by button will come on.
One of the three middle lights will also turn on showing
antenna position.
STEP 2: Turn on power supply to antenna.
STEP 3: Press Raise/Stow Button. Motion light will turn on
and antenna will raise. When antenna has raised, the
motion light will turn off and the raised light will be on.
STEP 4: Press ROTATE counter clockwise button to rotate
unit towards signal. Motion light will turn on. You must hold
this button in to maintain rotation. View your TV Picture and
release button to stop antenna rotation when TV picture
appears to be the best quality for your location. NOTE: If
pressing button does not turn on Motion light, the antenna is
at it's maximum rotation or not in up position.
STEP 5: To view a different TV channel, switch TV to
channel you desire and press and hold either rotate button
until your TV picture appears to be the best quality for your
location.
To Stow Antenna:
STEP 6: Push RAISE/STOW button to stow antenna.
MOTION LED will be lit. The antenna will automatically
return to its home position before stowing. MOTION LED
will turn off. STOWED LED will turn on.
STEP 7: Push POWER Button on control panel and ON/
OFF button on wall plate power supply to turn antenna off.
NOTE: BEFORE MOVING RV, ANTENNA MUST BE IN
STOWED POSITION. VISIBLY CONFIRM ANTENNA IS
DOWN BEFORE MOVING.
Turn Power
On/Off
Rotate
Antenna
Clockwise
Raise/Stow
Antenna
Indicates Antenna
is fully raised
Indicates Antenna
is moving
Indicates Antenna is
in Travel Position
Rotate Antenna
Counter Clockwise
NOTE: Blinking lights
indicate obstruction.