Wharfedale Titan 12 ACTIVE - Manual (Page 3)

WARNING AND SAFETY INSTRUCTIONS
1. READ INSTRUCTIONS carefully before operating this product.
2. RETAIN these instructions for future reference.
3. COMPLY WITH WARNINGS – All warnings and instructions for this product
should be adhered to.
4.
SETUP PROCEDURES – In order to avoid speaker damage, it is advisable to
establish and follow a pattern for powering on and off any sound system. Make sure
that all input and output level controls are at their minimum settings on all components
of the system. With all system parts connected, power on source equipment (playback
units, instruments, mixers, signal processors, etc.), BEFORE powering on the active
speakers. Power on the active speakers LAST. Wait until all system components have
stabilized, then bring up volume controls to operating level. Similarly, when shutting a
system down, always turn down the active speaker input controls and then turn off the
active speakers BEFORE shutting down other system components.
5.
CABLES – Be sure to use proper shielded signal cables for all line level and
microphone level connections to and from the active speakers.
6.
RIGGING – SUSPENDING – MOUNTING The rigging, suspension or mounting
of this speaker system can expose members of the public to serious health risks and
even death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR
OTHERWISE MOUNT THIS SYSTEM UNLESS YOU ARE FULLY QUALIFIED AND
CERTIFIED TO DO SO BY RELEVANT LOCAL, STATE AND NATIONAL
AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF
YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT
REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE AND
ASSISTANCE.
7.
CAUTION – These professional loudspeaker systems are capable of
generating very high sound pressure levels. Use care with placement and operation to
avoid exposure to excessive sound levels that could cause permanent hearing
damage.
8.
SERVICING – The user should not attempt to service this product. Please
contact your local Wharfedale Pro Service Center.
UNPACKING
All Wharfedale Pro products are fully checked before leaving the factory. After
unpacking, inspect the contents for any physical damage. Retain the shipping carton
and internal packing material. Check as soon as possible that the unit is functioning
properly. In the event of any shipping damage, please contact your dealer and the
shipper immediately to make a claim.
1