Wachsmuth & Krogmann QL-3100B - Manual (Page 18)

How to turn on pressure washer:
ƒ Operate the pressure washer in vertical position
only after connecting the water supply to the
water inlet and water supply has been turned on.
ƒ Switch power switch to ON.
ƒ Position the spray gun on the object to be
cleaned.
ƒ NEVER SPRAY TOWARDS A PERSON!
ƒ Direct the nozzle downwards.
ƒ Fully press down the trigger and proceed with
cleaning.
ON OFF
FIG. 33
Automatic ON/OFF:
The motor of this pressure washer does not run continuously. It only runs when the
trigger of the spray gun is squeezed. This feature will extend the lifetime of the motor
and prevent from overheating.
How to turn off the pressure washer:
ƒ Switch power switch to OFF.
ƒ Turn off water supply.
ƒ Press the trigger to depressurize system.
How to use the accessories:
1. SPRAY NOZZLE- Adjustable Spray Nozzle can be adjusted to a pencil stream or
fan spray.
ƒ Pencil Spray - A narrow stream has a high impact on cleaning surface
resulting in maximum deep cleaning in a concentrated area. However, this
narrow high impact spray must be used cautiously, as it may damage some
surfaces.
ƒ Fan Spray – A wide fan pattern spray will distribute the impact of the water
over a larger area, resulting in excellent cleaning action with a reduced risk of
surface damage. Large surface areas can be cleaned more quickly using a
wide fan pattern.
FIG. 34
17