Whynter FM-65G - Manual (Page 5)

5

Position your portable freezer in a location where there is
proper air circulation and electrical connections.

Keep the portable freezer away from heat and direct
sunlight if possible.

This portable freezer is suitable for vehicle use and
camping however, the appliance should never be
exposed to rain.

This portable freezer should not be placed in a built-in or
recessed area. It is designed to be freestanding.

The normal operation of the freezer depends on heat
radiation from the condenser. For the initial use, remove
all packaging and allow at least 6
” of clearance around the perimeter of the
freezer.
1. Remove all interior and exterior packaging.
2.
Position the freezer in a dry and well-ventilated place. Keep the freezer
away from direct sunlight, heaters and corrosive gases/chemicals.
3. Clean the interior surface with lukewarm water and a soft cloth.
4. When inserting the AC power-cord into the power socket, make sure
the power socket is a grounded 115V~AC / 60Hz socket. Also, make
sure that the unit’s grounding prong has not being tampered with.
Note: When inserting the DC power-cord, make sure the input is a 12V~DC /
24V power source.
5.
When moving the freezer, always use both handles to the carry the
unit as level as possible. This is in order to protect the compressor and
the sealed system.
Movement and Installation Instructions
Proper Location
Because this
unit is
compressor
based, ample
space is
required
around the unit
to allow it to
exhaust
properly.