Installation instructions, Location, Tools needed – Whirlpool 4380701 User Manual
Page 9: Parts supplied, Warning, Tools needed parts supplied, Important: read and save these instructions
9
electric drill and
3/32" or smaller bit
Tools needed
Parts supplied
Installation Instructions
Important:
Read and save these
instructions.
Important:
• Installer: Leave Installation Instructions with the
homeowner.
• Homeowner: Keep Installation Instructions for future
reference.
• Save Installation Instructions for local electrical
inspector‘s use.
22” - 36”
(55.9 cm - 91.4 cm)
14” (35.6 cm)
Window opening
measurements
Important: Observe all governing codes and
ordinances.
Check location where air conditioner will be installed.
Proper installation is your responsibility. Make sure you
have everything necessary for correct installation.
The location should provide:
• Grounded electrical outlet within four feet (122 cm)
of the window or through-the-wall location. Do not use
an extension cord.
• Free movement of air to rooms to be cooled.
• A large enough opening for the air conditioner.
22" (55.9 cm) minimum to 36" (91.4 cm) maximum
opening width
14" (35.6 cm) minimum opening height
• Adequate wall support for weight of air conditioner.
Air conditioner weighs between 90 and 178 pounds
(40.8 to 80.7 kg).
Do not install the air conditioner in an area where
the front panel will be exposed to heat sources that will
raise the panel surface temperature above 120°F
(50°C).
WARNING
!
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
flat-blade and
Phillips
screwdrivers
level
gloves
utility knife
safety
glasses
tape measure
Location
short
screw
wood
screw
L bracket
seal strip
sash seal
guide
panel