Wolf Appliance Company Range - Manual (Page 10)

10 | Wolf Customer Care 800.222.7820
Infrared Charbroiler
The charbroiler has an infrared burner that transfers intense
heat to food, searing the outside to seal in juices. Cook food
directly on the charbroiler grate, do not use cookware.
For optimal performance of the charbroiler and provide even
cooking, install the blank-off plate provided with the range.
Assemble charbroiler:
1 To assemble, position charbroiler frame on the range.
2 Position blank-off plate centered directly on ceramic
tiles. Refer to the illustration below.
3 Install charbroiler grate. Refer to the illustration below.
CAUTION
Use care when assembling charbroiler to avoid contact
with igniter.
CHARBROILER OPERATION
Stainless steel cover must be removed prior to operation.
1 Turn on ventilation.
2 Push and turn control knob counterclockwise to HI.
Igniter will begin to click until burner is lit.
3 Allow to preheat for 10 minutes.
CHARBROILER CARE
• After cooking is complete, allow charbroiler to remain on
for 10 minutes. High heat will help burn off excess food
particles.
• When cool, remove grate and place in sink. Cover with
wet dish towels and pour hot water over it to help loosen
residue. Clean with soap and a scouring pad. Rinse and
dry.
• To clean the frame, remove and place in sink. Soak in hot
water and mild detergent. Wash thoroughly and scrub
with scouring pad.
• To clean the blank-off plate, remove and use a soap-
filled scouring pad to remove residue. Clean with hot
water and mild detergent.
IGNITER
BLANK-OFF
PLATE
CHARBROILER
GRATE
Blank-off plate.
Charbroiler grate.
SURFACE OPERATION