Weider LCD VW46L - Manual (Page 9)

VIZIO
®
VW46L FHDTV20A User Manual
Version 10/20/2008 9
www.VIZIO.com
Chapter 1 Basic Controls and Connections
1.1 Front Panel
Power ‘VIZIO’ light – The VIZIO name lights white when
powered on and orange when powered off.
Remote Control Sensor – This is the window through which all
of the remote control signals pass to the sensor. Point the
remote control directly at this window for the best response to
the remote signal.
1.2 Right Side Panel Controls
POWER ( ) – Switch the VW46L FHDTV20A on by pressing the button once. Press the button again
to turn the TV off.
MENU – This button activates the On Screen Display (OSD).
Pressing it a second time will select the first option or feature of
the OSD. If an option or feature which requires the display of
the slide bar is selected, pressing this button will toggle
between displaying the slide bar and the last OSD menu.
CHANNEL +/- – Use these buttons to step up or down the TV
channels. While the OSD is active, these buttons function as
up and down controls in the OSD menus.
VOLUME +/- – Use these buttons to increase or decrease to
the speaker volume. While the OSD is active, these buttons
function as left and right controls in the OSD menus.
INPUT (ENTER) – Repeated
pressing of this buttons steps
through the input sources in
the following sequence: TV, AV
(S-Video), Component1,
Component2, RGB, HDMI1,
HDMI2, and HDMI3. Once you
have stepped through the
entire sequence, you will return
to the beginning. When the
OSD is on, if a sub-menu is
active, pressing this button will
return to the previous menu
level.