Well Traveled Living 02115 - Manual (Page 4)

Outdoor Fire Pit
page no.
4
Step
1
Assemble legs
Attach legs to hearth using 16 sets of hex screws (B) and lock washers (E).
Step
3
Assemble bottom bowl
Attach ash receiver to bottom bowl using 3 sets of screw (A) and small nut (C).
Step
2
Attach bowl support
Attach bowl support to legs using 4 hex screws (B).
Step
4
Insert bottom bowl
Insert bottom bowl onto bowl support.
Assembly Instructions
For Easiest Assembly:
‡ To avoid losing any small components or hardware, assemble your product on a hard level
surface that does not have cracks or openings.
‡ Clear an area large enough to layout all components and hardware.
‡ When applicable, tighten all hardware connections by hand first. Once the step is
completed go back and fully tighten all hardware.
‡ Follow all steps in order to properly assemble your product.
Step
5
Insert wood grate
Insert wood grate into bottom bowl.
Step
6
Assemble spark arrestor
Attach the handle to spark arrestor using large nut (D).
Step
7
Place spark arrestor
A. Place spark arrestor onto bottom bowl.
B. Use fire tool to remove and replace spark arrestor.