Westell Technologies IVX S-Class - Manual (Page 11)

IVX S-Class Administrator’s Manual Administrator programming: An introduction
A.7
Remote setting of day, night, holiday and auto modes
Normally, the system’s day/night mode operation will be manually controlled at an ESI Feature Phone
and/or set to follow the day/night mode tables (programmed by the Installer) automatically. In addition,
the Administrator can remotely change the mode and/or re-record the holiday greeting to handle
unexpected closings such as for inclement weather.
Remotely logging into the system with the Administrator password lets the caller re-record the ID 1
greetings (day and night) and the holiday greeting, as well as change the mode to day/night/holiday
(or auto).
1. At the main greeting, enter 4 5 6 # — or [the new password] # — to enter remote
programming mode.
2. You’ll hear prompts that will allow you to change the answer mode (day, night, holiday, or auto)
and/or to re-record the holiday greeting and the main greeting (ID 1). Follow the prompts to perform
the desired operation.
3. Exit by pressing and hanging up.
Prompts for remote settings: an outline
1 Set answer mode
1 Day mode
2 Night mode
3 Holiday mode
4 Use day/night table*
2 Record holiday main greeting
3 Record daytime main greeting
4 Record nighttime main greeting
Note: If the system is answered live and call is then routed to a mailbox., the Administrator can press 8 to
return to the main greeting and then follow the steps for making remote settings.
* This is used if the Installer has programmed an automatic calendar.