Whistler 1655 - Manual (Page 14)

OPERATION
Engaging VG-2
To engage or disengage VG-2 Detection:
• Press and hold the VG-2 button. Display shows:
• Pressing VG-2 a second time disengages VG2.
VG-2 must be engaged each time your detector is turned
on.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts off your
detector within 3 hours if you forget to turn it off. The timer
is reset if the detector is turned off, unplugged or any button
is pressed before the 3 hours have expired. The detector will
alert you with an audible and visual warning before it shuts
off. Display shows:
During this warning you can momentarily reset the unit by
pressing any button. This will reset the timer.
If the unit has automatically turned itself off, press any button
to turn the unit back on. You can manually engage the
Vehicle Battery Saver Mode by pressing and holding the City
button until one beep is heard. The auto shutoff function will
initiate after several seconds.
12
X K PWR Alert City VG-2
Ka
X K PWR Alert City VG-2
Ka
All Alert LED’s Flash
In Highway Mode In City Mode