Wachsmuth & Krogmann HM- 852 - Manual (Page 4)

OPERATIONS AND USE
1. Carefully remove the humidifier from the carton and take off all the protective
wrapping.
2. Place on a smooth level surface.
3. Remove the blue water tank from the base of the unit.
4. Turn it upside-down, and turn the filling cap counter-clockwise (left).
5. Fill the water tank with clean, cool tap water or distilled water and fasten the filling
cap by turning it clockwise (right).
6. Place the water tank back on the base of the unit, and allow the water to fill the
reservoir in the base for a few minutes.
7. Turn on the unit by pressing the On/Off switch. The power on indicator will
illuminate.
8. Adjust the mist intensity by adjusting the variable moisture control left and right
until the desired amount of cool mist comes out of the nozzle.
9. Adjust the mist nozzle away from walls and furniture.
Note: The humidifier will stop working and automatically give an alarm when the
water tank is empty.
- - - 4 -