Wharfedale WH-C - Manual (Page 4)

USER INSTRUCTIONS: WH2.1 SYSTEM
Rear Channel Connections
CENTRE FRONT REAR
LEFT LEFT RIGHT RIGHT
REAR LEFT REAR RIGHT
AV AMPLIFIER
Wall-mounting the
WH-SR1 and WH-SR2
Loudspeakers
1
3
2
Preparing
Speaker
Cables Connecting
Speaker
Cables
WH-SR1 and WH-SR2 Loudspeakers
The Wharfedale WH-SR1 and WH-SR2 are bipolar units designed for wall mounting and intended for use solely as rear effects
speakers.
In a Home Theatre System, the directional cues come from the front and centre channels. The rear channels provide ambience
and rear perspective and for this purpose a bipolar design with its mix of direct and reflected sounds ideal. To aid this effect we
recommend placing the WH-SR1 and WH-SR2 speakers in a high position behind the listener.
PREPARATION
Each speaker is supplied with four self-adhesive feet. Apply one to each rear corner before mounting.
CONNECTIONS
You will need one length of twin core cable per speaker. Connect the red (+) terminal of the Left rear unit to the red (+) terminal
of the amplifiers Left rear channel output. Connect the black (-) terminal of this unit to the corresponding black (-) terminal of the
amplifier. Repeat for the Right speaker. The connection panel uses screw terminals - the drawing above illustrates the connection.
MOUNTING
Connect the cable to the speaker. Site the speakers about 600 mm above the listening position and 2.5-3.5 metres apart, central
to the listener and behind the listening position. Ensure that the wall is sound and can support the product. Fix a suitable screw
firmly to the wall.