Westinghouse PT-19H520S - Manual (Page 24)

24
Connecting Your Personal Computer
Before making any connections, make sure all equipment is turned off.
Connection Types
• VGA Connection
- Connect a 15-pin analog VGA cable (not supplied) from your
computer’s “VGA OUT” port to the HDTV’s “VGA” port
- Connect a stereo mini cable from your computer’s “AUDIO OUT” port to
the HDTV’s “AUDIO IN” port
• DVI-D Connection
- Connect a Digital DVI-HDMI cable (not supplied) from your computer’s
“DVI-D OUT” port to the HDTV’s “HDMI” port
- Connect a stereo mini cable from your computer’s “AUDIO OUT” port to
the HDTV’s “AUDIO IN” port
Power
• Turn on your HDTV (wait a few seconds for it to power up)
• Turn on your computer
- The HDTV will automatically adjust to the computer’s resolution
Computer Settings
• For optimal picture quality, set timing mode of your computer’s to
recommended VESA ™ (Video Electronics Standards Association) mode
(see specifications of your purchased model from APPENDIX).
• Refer to your computer’s graphic card User Guide for directions to set
this timing mode.
• If using Microsoft Windows OS, please check its Display Properties.