Weider 831.15607.1 - Manual (Page 6)

6
3
28
5
30
31
3
4
2. Orient the Crossbar (2) so that the warning decal
is in the indicated location. Attach the Crossbar to
an Upright (1) with two M10 x 66mm Bolts (28),
two Joint Plates (11), and two M10 Nylon
Locknuts (31). Do not tighten the Locknuts yet.
Repeat this step with the other Upright (1).
3. Attach the Front Leg (4) to the Bench Frame (3)
with an M10 x 66mm Bolt (28), an M10 x 19mm
Screw (5), an M10 Washers (30), and an M10
Nylon Locknut (31). Do not tighten the Locknut
or Screw yet.
2
28
11
11
2
Warning
Decal
1
31
1
4. Attach the Bench Frame (3) to the Crossbar (2)
with two M10 x 68mm Bolts (27) and two M10
Nylon Locknuts (31).
3
2
31
27
4