West Bend 56310 - Manual (Page 4)

4
U
SING
Y
OUR
W
EST
B
END
®
12 C
UP
C
OFFEEMAKER
To use your West Bend
®
Coffeemaker, begin by assembling the appliance.
Reusable Nylon
Filter
Removable Filter
Basket
Water Reservoir
Shower Head
Glass Carafe
Water Level
Indicator
Non-Stick Coated
Warming Plate
ON/OFF Switch
WARNING: The coffeemaker will remain “ON” until turned “OFF.” Be sure to
turn power off after each use and when carafe is empty.
1) Place the appliance on a clean, flat surface and plug into outlet. You can
adjust the length of the power cord so that it is the exact length you desire.
a) To increase the length of the power cord: Grasp the power cord (not the
power plug) and gently lift it out of the slot, then pull the cord away from the
coffeemaker.
b) To decrease the length of the power cord: Grasp the power cord, lift out of
the slot, and then feed cord into the coffeemaker opening. Place cord in the
slot when finished.
2) Prior to first use, clean coffeemaker per instructions on page #6.
3) Remove carafe from appliance and fill with desired amount of cold water. Use
the easy measuring marks on carafe to ensure correct amount of water. Open
top lid and pour water into the water reservoir.