VTech VT2650 - Manual (Page 11)

10
Basic Operation
Call Forward
• A Handset (HS1), on an external call
can forward it to the other Handset
(HS2), by pressing and holding the
INTERCOM
key. The display of HS1 will
initially show:
• HS2 can Press ON , SPEAKERPHONE
or any dialing keys to answer the call.
NOTE
: If HS2 does not respond in about
30 seconds, the external call will be
returned to HS1 and the display will
show
CALL BACK
:
If the returned call is not answered
within 30 seconds, the external call will
end automatically.
CALL BACK
CALL FORWARDED
Call Transfer
• A Handset (HS1), on an external call can transfer it to the other Handset (HS2),
by pressing the
INTERCOM
key.
NOTE
: The external call is put on hold automatically.
• HS2 will ring, showing an intercom call.
• Pressing
ON
on HS2 will answer the intercom call. HS1 may discuss the
external call with HS2 while the call is on hold.
• Press
OFF
on HS1, to transfer the external call to the other Handset. The HS2
is now on the external call.
CALL TRANSFERRED
will briefly display on HS1.
NOTE
: If there is no answer on HS2, then HS1 can be reconnected to the held
call by pressing
ON
to reconnect to the external call.
Conference Call
It is possible to establish a conference
between two Handsets and the external
line.
If a Handset already has a connec-
tion to the external line, and the other
Handset presses
ON
or
SPEAKER-
PHONE
, a conference is immediately
established. Both Handsets will show:
CONF. 00:00:25
Handset Operation