Vision Fitness R2000 User Manual

Page 2

Text mode
Original mode

STEP

To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding, find
your new Fitness Cycle’s serial number located on the front axle tube, and enter here:

Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be
sure to read your Owner’s Guide before using your new Fitness Cycle.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12

NOTE:

It is recommended that you apply grease to the threads of each screw as you assemble your Fitness Cycle to prevent loos-

ening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely
tightening any ONE screw.

A s s e m b l y

G u i d e

R2100

AND

R2000

SEMI-RECUMBENT FITNESS CYCLES

STEP