Vision Fitness X6600HRT/DA - Manual (Page 6)

6
3
STEP
• Slide a small spring washer
(M20) onto the lower pedal arm
support, followed by the right lower
arm. Attach with a white Teflon
washer (M30), a flat washer (M30),
and bolt (M8 x 12), using Blue-han-
dled 5
MM Allen wrench.
• Pivot the lower arm and insert the
top end into the upper handlebar
bracket.
• Tighten the bottom bolt (M8) on the
arm bracket connection block, using
the 6mm L-shaped Allen wrench.
• Repeat the above steps to attach the
arms on the left side.
PINK BAG
3
STEP