Vivitar ViviCam F128 - Manual (Page 15)

14
Camera Options: Flash, Macro, Zoom, Display
Flash Options
There are several Flash options available on your camera. The options appear on the Photo
Capture Mode LCD screen in sequence.
To change the Flash mode, press the UP Quick Function button until you arrive at your desired
settings.
Important: When using Flash, stand between 8 to 10 feet away from the scene you would like to
capture.
Note: The MACRO mode must be turned OFF when you want to use the Flash.
To change the MACRO setting:

Slide the MACRO switch down to the Mountain icon.
(See the section titled „Macro Menu‟ for more details.)

When MACRO is OFF, the mountain icon appears on the LCD display.
Flash Type Description
Forced Off (Default)
No Flash

No flash will appear.

Use this when you do not want to activate Flash.
NOTE
: A „Turn On Flash‟ message appears when the camera
detects a need for flash. When this message appears, it is
recommended to press the Flash/Up button and select one of the
flash options: Auto Flash, Forced On
A
Auto Flash

When you want the camera to determine if Flash is needed, select
Auto Flash.

The flash will automatically turn on according to the lighting
conditions.

When the LED light stops blinking, the Flash is ready for use.
NOTE: In some cameras, an initial flash appears to test your
lighting conditions. If flash is needed, a second flash will appear
upon taking the photo.