Basic operation, Basic opera tion – VTech 9126 User Manual
Page 10
10
MAKING CALLS
Method 1------Live Dialing
Press PHONE. Dial the phone number.
Press OFF to end your call.
Method 2------Pre-dialing
Dial the phone number. Use the
key to backspace
if you make a dialing mistake. Then press PHONE.
Press OFF to end your call.
When the handset is in use, the IN USE/CHARGE light
on the Base Unit will flash. When the Handset is in the
Base Unit cradle, the IN USE/CHARGE light glows
steadily.
VOLUME CONTROL
While you are on a call, press
to raise the inbound volume and
to lower it. The handset
will display the relative volume setting as you adjust it.
CHANNEL CHANGING
If you experience noise or interference while on a call, you may be too
far from the Base Unit, or in an obstructed area. Try moving to a
different location. If this does not improve the transmission, press
PROG/CHAN. You can press this key more than once, if necessary.
NOTE: This feature only operates while you are on an active call.
B
ASIC OPERA
TION
BASIC OPERATION