Vivitar DVR 528 - Manual (Page 57)

56
Note: The only limitation of using the TV screen is that the camera is now not portable.
1) Connect the camera to a TV via the TV-out cable (supplied).
2) Turn on the TV and the camera, and then s
et the TV to “AV” mode.
3) You will need to set the TV format on the camera to suit the TV format of your TV set.
4) In the Video Capture mode there is a TV Out menu option – NTSC or PAL.
5) Select the option as per the format of the TV set you are using and press the OK button.
6) When the camera is set to record mode, you can preview the subjects you want to record on the
TV screen.
7) When the camera is set to Playback mode, you can review all the photos and videos stored in the
SD memory card on the TV.
Installing the Software
You must be connected to the internet to install and run the Vivitar Experience Image Manager
software.
1) Insert the installation CD into your CD-ROM drive. The installation screen should automatically open.