Velodyne Acoustics DSP-CONTROLLED SUBWOOFERS VDR-12 - Manual (Page 15)

12
.
w w w . v e l o d y n e . c o m
VDR Series User’s Manual
Specifications
SPECIFICATIONS VDR-10 VDR-12
Woofer 10” (24.5 cm) forward firing 12” (30.5 cm) forward firing
(8.2” piston diameter) (9.7” piston diameter)
with vented pole piece with vented pole piece
Amplifier: 200 watts Dynamic/ 200 watts Dynamic/
Class D 400 watts RMS Power 400 watts RMS Power
Cabinet Design Slot-loaded Slot-loaded
Bass-reflex Bass-reflex
Frequency Response 28 -120 Hz 25 - 120 Hz
(+/-3 dB) (+/-3 dB)
Voice Coil 2” 4-layer copper 2” 4-layer copper
Cone Reinforced Fiber Reinforced Fiber
Magnet Structure 40 oz. (2.5 lbs) 56 oz. (3.5 lbs)
High-Pass Crossover 80 or 100 Hz (6 dB/octave slope) 80 or 100 Hz (6 dB/octave slope)
Low-Pass Crossover 60 - 150 Hz 60 - 150 Hz
(12 dB octave, 24 dB ultimate) (12 dB octave, 24 dB ultimate)
Outputs Line-level and Speaker-level Line-level and Speaker-level
Inputs Gold plated Line-level and Gold plated Line-level and
Speaker-level Speaker-level
Phase 0°, 90°, 180°, 270° 0°, 90°, 180°, 270°
Auto On/Off Yes Yes
Removable Grill Yes Yes
Video Shielding Yes Yes
LED Power Indicator Yes Yes
Input Impedance 65K ohm (for LINE INPUT jacks)
1.2K ohm (for SPEAKER LEVEL INPUT terminals)
Sensitivity
Speaker-Level 1.0V
1.0V
Line 100 mV 100 mV
Power Supply 120V, 60 Hz AC 120V, 60 Hz AC
Cabinet (H,W,D) 15.9” x 15” x 16.8” 18” x 15” x 18”
(cm) with grille 40.4 x 38 x 42.7 45.7 x 38 x 45.7
Warranty (parts/labor) Three years (electronics - parts and labor)
Five years (drivers - parts and labor)
Shipping Weight (approx.) 54 lbs. (24.5 Kgs) 60 lbs. (27.3 Kgs)
Specifications are subject to change without notice.