VTech BS5822 - Manual (Page 9)

The wall mount brackets are designed for use on standard wall mount plates only .
1 . Follow the instructions on page 6 to connect the power to base and phone line .
2 . Line up the tabs on the wall mount adaptor with the holes at the bottom of the base . Snap the wall
mount bracket firmly in place.
3. Mount the telephone base on the wall. Position the telephone base so that the mounting studs fit
into the holes on the wall mount bracket . Slide telephone base down on the mounting studs until
it locks into place .
Wall mounting (optional)
• Install the base
unit away from
electronic
equipment such
as personal
computers,
television sets or
microwave ovens .
Avoid excessive
heat, cold, dust or
moisture .