Velodyne Acoustics SPL-1200R - Manual (Page 12)

NIGHT
Night mode limits the maximum output of the subwoofer for later
night listening or to be more considerate of close neighbors.
Press the night button to turn the night mode feature on or off.
Night mode, when active, is indicated by the reduced intensity of
the light.
VOLUME CONTROL
This control allows you to balance the output from the subwoofer
to the main speakers in your system. This control should be set
to achieve similar volume level from both the main speakers and
subwoofer. When pressing the volume up or down, the speed at
which the power light blinks indicates subwoofer volume - the
faster the blinking, the louder the unit plays. After the volume
blinking stops, the unit will blink out the actual volume number.
Slower blinks represent tens, and faster blinks represent ones.
So, for example, if the volume were set at 34, after the rapid
blinking stopped you would observe three slow blinks followed by
four faster blinks, indicating a volume of 34.
NOTE: The volume can also be adjusted via the buttons on the
back panel of the subwoofer. These buttons have the same effect
as pressing the up and down volume buttons on your remote.
The unit comes preset from the factory with the volume set at
30% of maximum setting.
PRESETS
There are 4 presets, consisting of Movies, R&B - Rock, Jazz -
Classical, and Games. As a preset is chosen, the light flashes
the corresponding number of times. The presets provide the
following characteristics for bass reproduction:
Movies: Maximum output and impact for
explosions and other action adventure
movie content.
R&B - Rock: Provides the driving bass found in today’s
rock music.
Jazz - Classical: The tightest, cleanest, lowest distortion
bass.
Games: Maximum loudness available for the
impact of video games.
11