Vivitar viviCam 3350 - Manual (Page 14)

4.0 Capturing Images -
Using your new Vivicam 3350 is fun and easy. There are two basic steps to
capturing your first image.
Step 1: Turn on the camera by
pressing the Power Button.
Step 2: Press the shutter button
to capture an image.
It is really that easy! The following sections will tell you about more features
that are available on your camera.
4.1 Power On the Camera -
To power on the camera press the Power/Menu button as shown above.
The camera will beep once, indicating that it is ready.
The Information/Status display will turn on like this:
In this example the camera is ready to capture 26
images in Hi resolution mode. (Display icons are explained in section 4.3.)
Note that the camera will automatically power-off after 20 seconds to save
battery power. To turn the camera on again, press the Power button.
Hi
026