Volvo 2001 S80 User Manual
Page 211
2001 Volvo S80
that the button has been successfully programmed..
Programming rolling codes
Determine, in one of the following ways, if your garage door uses a rolling code system and is
manufactured after 1996:
· Refer to the garage door opener owner's manual for verification.
· If your hand-held transmitter appears to program the HomeLink® Universal Transceiver but the
programmed button does not activate the garage door, your garage door opener may have a rolling code.
· Press the programmed HomeLink® button. If the garage door opener has the rolling code feature, the
HomeLink® indicator light flashes rapidly and then glows steadily after approximately 2 seconds.
To train a garage door opener with the rolling code feature, follow these instructions after the
transceiver has been programmed (the aid of a second person may make the training quicker and easier):
1. Locate the training button on the garage door opener motor head unit. The exact location and color of
the button may vary. If you encounter difficulty, refer to the garage door opener owner's manual or call:
1-800-355-3515 (Internet:
).
2. Press the "training" button on the garage door opener motor head unit until the "training" light comes
on.
3. Firmly press and release the programmed HomeLink® button. Press and release the HomeLink®
button a second time to complete the training process.
Some garage door openers may require you to do this procedure a third time to complete the training.
The programmed button on your HomeLink® Universal Transceiver
should now operate your garage door opener. The original hand-held transmitter can also be used, if
necessary, to operate the garage door.
The remaining two HomeLink® buttons can be programmed in the same way. In the event of any
problems in programming the HomeLink® Universal Transceiver, call toll-free 1-800-355-3515
Operating the HomeLink® Universal Transceiver
Once programmed, the HomeLink® Universal Transceiver can be used in place of hand-held
transmitters.
file:///K|/ownersdocs/2001/2001_S80/01s80_11.htm (3 of 5)12/30/2006 3:48:33 PM