VTech LS6325-2 - Manual (Page 8)

Play messages
To play messages with the telephone base:
Press
/PLaY/
STOP
when the telephone is not in use.
Options during playback:
Press /VOL+ or /VOL- to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /rePeaT to repeat the message currently playing.
Press /rePeaT twice to listen to the previous message.
Press X/DeLeTe to delete the current message. The system
advances to the next message.
Press /
PLaY
/STOP to stop.
To play messages with a handset:
Press
MeNU/SeLeCT twice when the telephone is not in use.
If you have either new or old messages, the messages play
automatically. If you have both new and old messages:
To play new messages, press
MeNU
/SeLeCT to select
>Play new msgs.
To play old messages, scroll to select >Play old msgs and
then press
MeNU
/SeLeCT.
Options during playback:
Press / VOL or VOL/
CID
to adjust the speaker volume.
Press eQ to adjust the handset message playback audio
quality.
Press 6 to skip to the next message.
Press 4 to repeat the message currently playing. Press 4 twice
to listen to the previous message.
Press 3 to delete the current message. The system advances
to the next message.
Press 5 to stop.
Delete all messages
To delete all messages at the telephone base:
Press
X/DeLeTe when the phone is not in use.
To delete all messages with a handset:
Press MeNU/
SeLeCT
when the handset is not in use.
Scroll to select >answering Sys and then >Delete all old
messages? Press
MeNU
/SeLeCT.
Call intercept
If you want to talk to the person whose message is being
recorded, press /
FLaSH
or on the handset.
access the answering system remotely
Dial your telephone number from any touch-tone telephone.
When the system plays your announcement, enter the
two-digit remote code. The preset code is 19.
Then you can enter one of the following remote commands.
Hang up or press 8 to end the call.
•
•
•
•
•
•
•
•
•
•
•
•
•
.
2.
.
2.
3.
4.
Command Function
1 Play all messages.
2 Play only new messages.
3 Delete the current message (during playback).
33 Delete all old messages.
4 Repeat the current message (during playback).
44 Skip to the previous message (during playback).
5 Stop.
*5 Hear a list of remote commands.
6 Skip to the next message (during playback).
*7 Record a new announcement.
8 End the call.
0 Turn the answering system on or off.
96-0022-00-00
IMPOrTaNT!
If you have difficulty with your telephone and headset, please
refer to the user’s manual for a full set of installation and
operation instructions. For customer service, visit our website at
www.vtechphones.com or call (00) 595-95. In Canada, go
to www.vtechcanada.com or call (00) 26-3.